Products

Supercharger WhinE ?

Innovations in sound tube technology brought to your Twin Screw

For the latest information on the official launch of the ONLY Twin Screw Supercharger Sound Enhancer Kit available, leave your name and email address or contact us directly on the number below. We look forward to hearing from you!

Foster SC Mods have developed the first Twin Screw Supercharger Sound Enhancer on the market. Since 1994 we have been beloved Twin Screw fans and enthusiasts, and like many love the sweet song and sound created by these superchargers.

The problem is that recent designs in muscle cars come with heavy insulation and acoustics dampening that insulates the drivers cabin from the outside.

In addition to that, newer designs of twin screw’s keep rotor pulses sound (whine) in check with heavy plastic intakes and closed air box systems, that dampen and control this sound.

Loud long tube headers and exhaust also reduce the ability to hear the rotor whine under heavy engine loads. This is prompted Foster SC

Mods to develop the Sound Enhancer Kits, the only ones of their kind available today.

Foster SC Mods have developed the first Twin Screw Supercharger Sound Enhancer on the market. Since 1994 we have been beloved

Twin Screw fans and enthusiasts, and like many love the sweet song and sound created by these superchargers.

The problem is that recent designs in muscle cars come with heavy insulation and acoustics dampening that insulates the drivers cabin from the outside.

In addition to that, newer designs of twin screw’s keep rotor pulses sound (whine) in check with heavy plastic intakes and closed air box systems, that dampen and control this sound.

Loud long tube headers and exhaust also reduce the ability to hear the rotor whine under heavy engine loads. This is prompted Foster SC

Mods to develop the Sound Enhancer Kits, the only ones of their kind available today.

Sound tube materials are made from high quality durable materials. Smooth interior walled high heat resistant tubing/hose is used and coupled with end expansions to air box induction and firewall. High heat resistant braided cut sleeve covers are used, and all hose ends are finished and held together with marine grade, thick walled adhesive heat shrink.

Stage 1 Kit sound tube, is designed to maximize sound travel and twin screw pulse induction whine by as much as 50% over stock setup.

This method uses larger ID hose and a shorter overall more direct path from the induction air box to the firewall. This requires drilling a hole (with supplied hole saw) in the firewall between the pedals and to the left of the steering column. Don’t be alarmed, this is easy to access and an accessible location to drill.

This takes just minutes to carry out and pull the sound tube hose through. An air box sound tube entry hole is drilled using the same hole saw bit and is lower on the air box providing a more clean appearance, as the sound tube is not easily visible.

Stage 1 Kit uses a portion of the stock sound tube which connects to the firewall, for those who don’t want to drill a hole through the firewall itself.

The OEM sound tube is cut at a marked location near the firewall and couples with my custom made sound tube. The entry of the OEM sound tube into the cabin is behind the gas pedal.

We also provide 3 black nylon 3/8″ pedal spacers to lift the pedal away from the entry point, for increase sound travel.

These throttle pedal spacers also provide a much needed lift to the OE’s low pedal placement, for better heal to toe method control. Due to the small inner diameter of the OEM portion of the sound tube, and sharp radius bends, acoustics transfer is limited to a moderate to heavy increase in supercharger whine. Increase is approximately 25% over stock setup and is greatly improved over the OEM acoustics.

Please contact us if you have any questions on our Sound Modification Kits

using the number below.

Liquid error (layout/theme line 169): Unknown operator =